DIN1.STATE TO DIN7.STATE

Description

Reads the state of one digital input according to the number identified in the command.

AKD-N only supports DIN1 to DIN3.

General Information

Type	R/O Parameter
Units	N/A
Range	0 to 1
Default Value	N/A
Data Type	Integer
Start Version	M_01-00-00-000

Variants Supported

Variant	Supported
AKD Base	Yes
AKD with Position Indexer	Yes
AKD EtherCAT	Yes
AKD CANopen	Yes
AKD BASIC	Yes
AKD SynqNet	Yes*
AKD EtherNet/IP	Yes
AKD Profinet	Yes
AKD sercos® III	Yes
AKD-N	Yes
AKD-C	No

*In SynqNet, a parameter may be available in the firmware but have no effect on the system. See SynqNet Supported Parameters.

Fieldbus Information

If your drive type is listed as supported but no index, address, or instance number is listed, then this parameter is accessible through WorkBench, but not over your fieldbus type. For information on SynqNet parameters see SynqNet Supported Parameters.

Paramter	Fieldbus	Address	Attributes	Signed?
DIN1.STATE	Profinet	2064	Byte	No
DIN1.STATE	sercos® III	2064	2 Octets
DIN2.STATE	Profinet	2069	Byte
DIN2.STATE	sercos® III	2069	2 Octets
DIN3.STATE	Profinet	2074	Byte
DIN3.STATE	sercos® III	2074	2 Octets
DIN4.STATE	Profinet	2079	Byte
DIN4.STATE	sercos® III	2079	2 Octets
DIN5.STATE	Profinet	2084	Byte
DIN5.STATE	sercos® III	2084	2 Octets
DIN6.STATE	Profinet	2089	Byte
DIN6.STATE	sercos® III	2089	2 Octets
DIN7.STATE	Profinet	2094	Byte
DIN7.STATE	sercos® III	2094	2 Octets

Fieldbus	Parameter	Instance	Data Size	Data Type
EtherNet/IP	DIN1.STATE	65	1 Byte	Integer
	DIN2.STATE	70
	DIN3.STATE	75
	DIN4.STATE	80
	DIN5.STATE	85
	DIN6.STATE	90
	DIN7.STATE	95

Fieldbus	Index/Subindex		Is 64 bit?	Attributes	Signed?	Object Start Version
Modbus	128	DIN1.STATE	No	8 bit	No	M_01-03-00-000
	138	DIN2.STATE
	148	DIN3.STATE
	158	DIN4.STATE
	168	DIN5.STATE
	178	DIN6.STATE
	188	DIN7.STATE